Two-stage / with cord, plug, and switch / with thermal protector |
 | | | ULVACKIKO's Direct-Drive Oil-Sealed Rotary Vacuum Pumps aretheslidingvane "Gaede Type". Oil is used to lubricate therotarymechanismand to seal the vacuum pumping chamber,producingexcellent vacuumstability and reliability. Smalldirect-drive pumpsfeature fasterstart-up and quicker pump downcompared tobelt-driven pumps. Inaddition, ULVAC KIKO 's G-SeriesOil-SealedRotary Vacuum Pumps arecost-effective and operatequietly.
G-Series pumps are available in single and dual stageversionswithpumping speeds ranging from 5 L/min.to100L/min.. |
|
 Specifications |
| | Unit | 50Hz | 60Hz | | ActualPumpingSpeed | L/min. | 100 | 120 | | Ultimate pressure | Pa | 6.7 x 10-2(6.7×10-1)
(6.7) | | Motor | | Single phase, 220V, 400W, 4poles,capacitorstarting | | Full load current | A | 1.1 | 1.2 | | Oil capacity | mL | 800 | | Recommended oil | | SMR-100 | | Weight | kg | 22.4 | | Inlet port diameter | mm | O.D. dia.27 x I.D. dia.20 | | Ambient operation temp.range | °C | 7 – 40 | | Dimensions | mm | 173.5(W) x 460.5(L) x 264(H) |
|
| *Ultimate pressure is measured withMacleodgauge.In ( ) shows the measurements withPiranigauge. |
 Caution |
| 1. | Ensuretheproper oil level and oil condition are maintainedatalltimes. | | 2. | Beforestopping a pump it should be vented to atmospheretoprevent theback-streaming of oil. (Contact your localsalesrepresentative forapplications assistance.) | | 3. | Whenoperating a pump for long time above 0.1MPa, it ispossiblethatoil mist be exhausted from the exhaust port.Installation ofOilmist trap (OMT Series) will eliminate thispotential sourceofcontamination. | | 4. | Oil-sealedrotary pump is not recommended forcontinuousoperation nearatmospheric pressure. |
| Outlinedrawing |
| PumpingSpeedCurves |
| Option |
Optionalsuctionport
| Size | Note | | Suctionpipeforhose | Dia.27 | Attachedtostandardtype | | Suctionpipeforhose | Dia.8 | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.12 | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.15 | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.18 | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.22 | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | KF-25 suctionport | KF-25X(20X20) | Option | | A typesuctionpipe | PT1/4-L20,male | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | B typesuctionpipe | PT1/4-L20,female | Option. 40X40adapter isneeded,usethe suction pipe /40X40 adapter | | C typesuctionpipe | PT1/4-L10,male | Option. 40X40adapter isneeded,usethe suction pipe /40X40adapter |
|
Optional exhaust port
| Size | Note | | Exhaust port cap | - | Attachedtostandardtype | | Exhaustpipeforhose | Dia.27 | Option | | KF-25 exhaustport | KF-25 | Option |
|
Trap for exhaust side
| Model | Note | | Oil-mist trap | OMT-100A | Option | | In-linetypeoil-misttrap | OMI-100 | Option |
|
| Optionalvoltage |
| Voltage | Applicable Volt | CE Marked | CSA Marked | cTUVusMarked | | Singlephase,100V | Standard | | | | | Singlephase,200V |  | | | | | Singlephase,240V | | | | | | Threephase,200V |  | | | |
|