 | | | Itisatype applicable for the voltages all the world, foramulti-voltagemotor is equipped to GLD series. 2 types,forsingle/three phase,are available.
As it is applicable for various voltages by a simplewiringchange,there is no necessity to change the motor for useinaccordance witha voltage in the countries where the pumpisused.
For the single phase, it is used at 100V-120V or200V-240V.Thefunctional performance such as gas-ballast mechanism,oilback-flowprevention mechanism, large-sized oil-level gauge, etc.isequal toGLD Series. It isCEself-declaredproducts. |
|
 Specifications |
| | Unit | 50Hz | 60Hz | | ActualPumpingSpeed | L/min. | 200 | 240 | | Ultimate pressure | Pa | 6.7 x 10-2(6.7×10-1)(G.V.closed)
(6.7)(G.V.open) | | Motor | | Three phase, 550W, 4 poles, Multiple-range motor
AC200-240V/380-460V | | Full load current | A | 3.0(200V), 3.6 (240V),
1.8 (380V), 2.0 (415V) | 2.7(200V), 2.8 (240V),
1.5 (380V), 1.7 (460V) | | Oil capacity | mL | 1,100 | | Recommended oil | | SMR-100 | | Weight | kg | 26 | | Inlet, outlet pipe diameter | mm | KF-25 | | Ambient operation temp.range | °C | 7 – 40 | | Dimensions | mm | 170(W) x 513.5(L)xabout240(H) |
|
|
| *Ultimate pressure is measured withMacleodgauge.In ( ) shows the measurements withPiranigauge. |
 Caution |
| GLDSeries,compared with G Series, is markedly upgraded. For thesakeofhaving the maximum performance, in addition to notes forGseries,be careful of also the followings. | | 1. | GLDseriesiscapable of reaching to a high vacuum area (10-2 Pa). Flanges, vessels usable at a high vacuumarerequired. | | 2. | Anoil-sealed rotary pump is not recommended forcontinuousoperationnear atmospheric pressure. |
| Outlinedrawing |
| PumpingSpeedCurves |
| Option |
Optionalsuctionport
| Size | Note | | KF-25 suctionport | KF-25X(50X50) | Attachedtostandardtype | | Suctionpipeforhose | Dia.8 | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | Suctionpipeforhose | Dia.12 | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | Suctionpipeforhose | Dia.15 | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | Suctionpipeforhose | Dia.18 | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | Suctionpipeforhose | Dia.22 | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | Suctionpipeforhose | Dia.27 | Option | | Suctionpipeforhose | Dia.30 | Option | | Suctionpipeforhose | Dia.34 | Option | | A typesuctionpipe | PT1/4-L20,male | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | B typesuctionpipe | PT1/4-L20,female | Option. 50X50adapter isneeded,usethe suction pipe /50X50 adapter | | C typesuctionpipe | PT1/4-L10,male | Option. 50X50adapter isneeded,usethe suction pipe /50X50adapter |
|
Optional exhaust port
| Size | Note | | Exhaust port cap | - | Attachedtostandardtype | | Exhaustpipeforhose | Dia.27 | Option | | KF-25 exhaustport | KF-25 | Option |
|
Trap for exhaust side
?i ?? | Model | Note | | Oil-mist trap | OMT-200A | Option | | In-linetypeoil-misttrap | OMI-200 | Option |
|
Trap for suction side
| Model | Note | | For-line trap | OFI-200C | Prevent counter flowofoildiffusion into vacuum chamber, Need KF-25clampforattaching | | For-line trap | OFI-200V | Prevent mixing powder orliquidintothe pump, Need KF-25clumpforattaching |
|
|